Dimming the display

Pressing the DIMMER button on the remote control changes the brightness of the display (normal/dimmed/off).

Switching the display

Every time you press the FL SELECT button, the display changes between the channel, title number, and time. The display may not change, depending on the disc or recording conditions.

Introduction Recording

15 Channel indicator

Displays the current channel or other numbers such as a title number, track number, bit rate or input selection.

16 Multi display

Displays the current time, elapsed time, remaining time, starting time of programmed recording, chapter number or message, etc.

17 Analog output level indicator Displays the analog output level.

L+R: Stereo and bilingual (left (main) channel and right (sub) channel)

L: Left (main) channel R : Right (sub) channel Off : Mono

Level indicator may not show exact sound level. It only shows the average level.

SAT indicator and channel selection

While the SAT indicator illuminates, you can select channels of a connected satellite receiver from the recorder.

(It is necessary to finish the connection and the settings ( page 20, 45, INSTALLATION GUIDE).)

Each time you press the SAT.CONT. button, the SAT indicator turns on and off.

Playback

Editing

Library Function setupOthers

19

Page 19
Image 19
Toshiba RD-XS32SB owner manual Dimming the display, Switching the display, Channel indicator, Multi display