Toshiba RD-XS32SB owner manual 160, Operational settings

Function Setup

Customizing the function settings (Continued)

Operational settings

Operation beep		Instant replay interval
HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD	CD	HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD	CD

Turn on or off a confirmation beeper announcing when a command is received.

Sets how far back is replayed when the INSTANT REPLAY button is pressed.

Off:

Turns off the beep sound.

On:

Turns on the beep sound.

Note

•You cannot turn off beeps for alerts irrespective of this setting.

Recording complete beep

HDD DVD-RAM DVD-RW DVD-R

This is used to set whether or not a buzzer sounds when dubbing and so forth is finished.

Off:

Buzzer does not sound.

On:

Buzzer sounds.

Note

•You cannot turn off beeps for alerts irrespective of this setting.

IR Code

Switches the codes to operate the recorder. If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each recorder to avoid confusion in the response of the recorders.

For details about this setting, refer to “Operating the second and third TOSHIBA HDD/DVD video recorders with the remote control of this recorder” ( page 54, “INSTALLATION GUIDE”).

DR 1 : DR 2 : DR 3

Instant skip interval

HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD

Sets how much time is skipped when the INSTANT SKIP button is pressed.

5 sec. : 10 sec. : 30 sec. : 5 min.

5 sec. : 10 sec. : 30 sec. : 5 min.

Title thumbnail point

HDD DVD-RAM DVD-RW DVD-R

For recorded titles, sets how far a scene from the start is set as the title thumbnail.

0 sec. : 3 sec. : 10 sec. : 35 sec. : 1 min. : 5 min.

Note

•Thumbnails can also be changed to other scenes.

See page 100.

HDD/RAM title play

HDD DVD-RAM

Sets the resume play per title.

Title resume:

Remembers the point where you stop playback. Allows you to resume the playback from that point.

Serial playback:

You can play back titles (Original, Playlist) stored in the HDD or a DVD-RAM continuously.

Because there is no division between titles, the recorder remembers only the last point where you stopped playback.

Still group interval

DVD-RAM

Sets an interval for display of still pictures (in seconds) when playing back a collection of still images.

1 sec. : 2 sec. : 3 sec. : 5 sec. : 10 sec. : Default

Priority Contents

To select the playback priority between JPEG (picture) files and MP3/WMA (audio) files.

Photo: JPEG files take priority over MP3/WMA files.

Audio: MP3/WMA files take priority over JPEG files.

Notes

•If this selection does not correspond to disc contents, the recorder will take a longer time to start playback of the disc.

•To change this setting to a loaded disc, open the disc tray after the setting, then close the disc tray to have the recorder read the disc again.

160