164

If Something Goes Wrong

Resolving a hardware conflict

2Click My Computer icon with the secondary button, then click Properties.

The System Properties dialog box appears.

3Click the Hardware tab.

4Click the Device Manager button.

5Double-click the category listed as PCMCIA adapter.

The operating system displays your PC Card’s Properties dialog box, which contains information about your PC Card configuration and status.

The computer stops working (hangs) when you insert a PC Card.

The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address. See “Fixing a problem with Device Manager” on page 152 for more information.

Since all PC Cards share the same socket, each card is not required to have its own address.

Hot swapping (removing one PC Card and inserting another without turning the computer off) fails.

Follow this procedure before you remove a PC Card:

1Click the PC Card icon in the system tray.

2Click Stop xxxx, where xxxx is the identifier for your PC Card.

The operating system displays a message that you may safely remove the card.