Toshiba SD-260E ES To cancel the Progressive mode, Parental Setup Parental Level, Change Password

If you do not see anything on the screen or if you do not select “OK” within ten seconds, video output setting will be returned to previous setting automatically.

If “PROGRESSIVE” is selected in theVIDEO OUTPUT menu and the unit is connected to a standard (analog) TV, no video output will be seen on the screen.

To cancel the PROGRESSIVE mode:

Press OPEN/CLOSE button and then TIME button. After that, enter the 3-digit number, “784” using number buttons. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV.

AUDIO SETUP

It is impossible to connect speakers directly to this DVD player unless an AV amplifier is used.

COMPRESSION:

Boosts frequency response. This item can be selected between “OFF” to “MAX”.

LPCM OUTPUT:

This item can be selected as “LPCM 48K” or“LPCM 96K” .

LANGUAGE SETUP

Audio, disc menu and subtitle items will not be available if the player is in RESUME (Pre-Stop) mode.

OSD LANGUAGE:

You can select the default OSD language of the player menus.

AUDIO:

You can select the default audio language if supported by that DVD disc.

SUBTITLE:

You can select the default subtitle language if supported by that DVD disc.

DISC MENU:

You can select the DVD’s disc menu language among these languages. Disc menu appears in the selected language, if supported by that DVD disc.

PARENTAL SETUP

PARENTAL SETUP page will not be available if the player is in RESUME (Pre-Stop) mode.

Playing some DVDs can be limited depending on the age of users. The “Parental Control” function allows playback limitation level to be set by the parents.

PARENTAL SETUP (Parental Level):

Parental Level can be adjusted to one of the eight levels or “NO PARENTAL”. “NO PARENTAL” or level “8 ADULT” adjustments let you watch all of the DVD titles ignoring the DVD disc’s parental level. You can watch the DVD discs, which have the same or lower parental level than the player’s selected level only.

PASSWORD:

Password to change the parental level can be set by using this option.

Factory preset of the password is “0000”. You have to set a 4- digit password when you select a parental level for the first time.You have to enter your password every time you want to change the parental level. If you forget your password, please contact technical service.

Change Password:

Using this item you can change the current password.

To change the password, you will be prompted to enter your old password. After you have entered your old password, you can now enter the new 4-digit password.

You can use CLEAR key to delete the incorrect entry.

Press OPEN/CLOSE to activate parental setup setting

PREFERENCES

ANGLE MARK, SMART NAVI and DEFAULTS items will not be available if the player is in RESUME (Pre-Stop) mode.

ANGLE MARK:

This option allows you to turn ON/OFF the angle mark on the screen, which is displayed to indicate that a multi angle scene has started. It also shows which angle you are currently watching.

STANDBY TIME:

Standby activation time can be adjusted or standby can be disabled when using this option. Standby can only be activated when one of the time option is selected and no button is pressed during the selected time duration in stop mode.

SMART NAVI:

This option allows you to enable or disable the SMART NAVI, which is used for playing MP3, MPEG, MPEG4, DivX® or JPEG CDs.

TRANSPARENCY:

Using this option to select one of the transparency levels for on screen display.

- 30 - ENG