Toshiba SD-260E ES manual Component Video Ypbpr / Progressive Scan & Connection

COMPONENT VIDEO (YPBPR) / PROGRESSIVE SCAN & CONNECTION

Component Video (YPBPR) output jacks can be used to have the best picture quality. Your TV set must have component video (YPBPR) input connectors for this type of connection. These jacks are used for only video connection. For audio, red & white output jacks must be used.

•If you have a “high-definition” or “digital ready” TV, you may take advantage of the DVD Player’s progressive scan output for the highest video resolution possible.

•Select the Progressive Scan mode by choosing “PROGRESSIVE” on the VIDEO OUTPUT menu, see page 29.

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled when you try Progressive Scan on the DVD Player.

1.Connect the COMPONENT VIDEO OUT jacks on the DVD Player to the corresponding IN jacks on the TV using the YPBPR cable.

2.Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio Left and Right IN jacks on the TV using the audio cables.

35 016 286

Audio (Left / Right) Cable
(commercially available)	Component Video Cable
	(commercially available)

LE FT R IG H T Y PB PR

AUDIO INPUT COMPONENT VIDEO INPUT

¥NOTE:

•When using the component video cables (YPBPR), do not connect the Scart socket.

- 15 - ENG