A track is skipped forward or backward each time the button is pressed.

Pause

Press PLAY/PAUSE during playback.

The play freezes.

To return to normal play:

Press PLAY/PAUSE again.

DIRECT SELECTION OF TRACKS

Selecting by Time

You can play the audio CD starting from any time point you want.

Press SEARCH on the remote control during playback.

The time search box is displayed on the screen as GO TO: _ _ : _ _ / xx : xx

Enter the time using number buttons.

¥NOTE:

Press RETURN to cancel the operation.

If you wait for ten seconds without pressing any button for selecting tracks, the operation is cancelled.

Accessing tracks using number buttons

You can play any track you want, just by pressing the corresponding number button.

For the track numbers which are greater than “9”, use +10 button. Press this button once and then enter the two digit track number.

If you attempt to enter a number greater than the total number of tracks on disc, symbol is displayed on screen.

REPEAT PLAY

Press PLAY MODE during playback.

Each time this button is pressed, a different repeat box is displayed on the screen.

If “REP-ONE”is displayed, the current track will be played again.

If “REP-ALL”is displayed, all tracks on disc will be played again.

If “REPEAT OFF” is displayed, the repeat mode is disabled.

Repeating a section between two specific points

(A – B repeat)

Press A-B RPT during playback at the point where repeat play is to commence (A).

“A TO B SET A” is displayed.

Press A-B RPT again at the point where repeat play is to be concluded (B).

“A TO B SET B” is displayed and the repeat play of the selection between points A and B starts.

To return to normal play:

Press A-B RPT again. “A TO B CANCELLED” is displayed and the A-B Repeat is disabled.

¥NOTE:

If you give up entering the point B after entering point A, simply press RETURN and the operation is cancelled.

CONVENIENT FUNCTIONS

Displaying the time information

Press TIME during playback.

Each time this button is pressed, an information box is displayed on TV screen to indicate the status of the time displayed on the VFD display.

If “SINGLE ELAPSED” is displayed, the VFD display on the unit shows the elapsed time for the track that is being played.

If “SINGLE REMAIN” is displayed, the VFD display on the unit shows the remaining time for the track which is being played.

If “TOTAL ELAPSED” is displayed, the VFD display on the unit shows the elapsed time for the disc which is being played.

If “TOTAL REMAIN” is displayed, the VFD display on the unit shows the remaining time for the disc which is being played.

Program Function

Press PROGRAM button to select program mode in stop mode.

Enter track numbers that you want to add to program list.

For the track numbers which are greater than “9”, use +10 button. Each press increases the number by 10.Then type the second digit of track number.

Press ENTER button to finish the program entry.

Screen is cleared and it will start playing the program list.

- 26 -

ENG

Page 26
Image 26
Toshiba SD-260E ES manual Selecting by Time, Accessing tracks using number buttons, Program Function