Toshiba SD-6980SY manual TV Aspect, Video Output Select Video Output

00873A-SD-6980SY-2 8/23/05 4:47 PM Page 65

Changing Setup Menu

ŒTV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

-4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

-4:3 Pan & Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

-16:9 Wide : You can view the full 16:9 picture on your wide screen TV.

TV ASPECT

4:3 Letter Box

4:3 Pan&Scan

16:9 Wide

´Still Mode

These options will help prevent picture shake in still mode and display small text clearer.

-Auto : When selecting Auto, Field/Frame mode will be automatically converted.

-Field : Select this feature when the screen shakes in the Auto mode.

-Frame : Select this feature when you want to see small letters more clearly in the Auto mode.

ˇScreen Messages

Use to turn on-screen messages On or Off.

¨Black Level

Adjusts the brightness of the screen.(On or Off) It does not function in Progressive mode.

ˆTV System

1.NTSC Disc : In case of using NTSC disc

•If your TV system only has PAL-Video input, you must choose “PAL”. When you choose “PAL”, Interlace output format is PAL 60 Hz output or Component (I-Scan) 480i.

•If your TV system only has NTSC input, you must choose “NTSC Output”.

2.PAL Disc : In case of using PAL disc

•If your TV system only has NTSC-Video input, you must choose “NTSC Output”.

•If your TV system only has PAL input, you must choose “PAL Output”.

ØVideo Output Select Video Output.

- COMPOSITE/S-VIDEO : Select when you want to use Video and S-Video Out.

- COMPONENT(I-SCAN) : Select when you want to use Video and Component 525i(480i)/625i(576i) (Interlace) Out.

- HDMI/COMPONENT(P-SCAN) : Select when you want to use Component 525p(480p)/625p(576p) (Progressive) Out or HDMI.

•If the Yes/No selection in the Display Setup sub Menu is not made within 10 seconds, the screen returns to the previous menu.

•Video Output mode can also be changed in the following sequence in no disc mode by pressing the V.OUT button.

COMPOSITE/S-VIDEO ➝ COMPONENT(I-SCAN) HDMI/COMPONENT(P-SCAN)

If HDMI/COMPONENT(P-SCAN) mode is selected and your TV does not support HDMI or progressive scan, you cannot see any picture. Press the V.OUT button until the picture can be seen on the screen.

		DISPLAY SETUP
TV Aspect	: 4 : 3 L-Box		√	Changing SetupMenu
Still Mode	: Auto
Screen Messages	: On
Black Level	: Off
TV System	: PAL
Video Output	: COMPOSIT/S-VID √
HDMI	: 480p		√
		DISPLAY SETUP
COMPOSITE/S-VIDEO
COMPONENT(I-SCAN)
HDMI/COMPONENT(P-SCAN)

ENG-65