Mounting direction | Toshiba SD-W1111 instruction

	OD-A017-02
TOSHIBA DVD-RAM SD-W1111	‘99/06/26 Version 1.0

10.2 Mounting direction

Install direction Horizontal or vertical installation

(When using an 80mm disc, vertical direction installation is not allowed.) Allowable slants (Refer to the drawing.) Left/right directions: Within ±15°.

(When installing vertically, the allowable slants toward the top plate bottom should be 0°.)

Front/rear directions:Within 10°

15° max 15° max

15° max

10° max

10° max

Page 16

Product Specification

Image 16

Toshiba SD-W1111 specifications Mounting direction

Contents

Toshiba Toshiba DVD-RAM SD-W1111 Precaution 10.1 15.1 Features Scope External views and dimensions Basic specifications DVD-ROM ∙ Average seek time Operating time of Seek command Power supply specifications Mechanical specifications Reliability specifications Environmental specificationsError rate Temperature Relative humidity Vibration5 to 300 HzAltitude Static electricity EN61000-4-6 EN61000-4-8 EN61000-4-11 9Blockdiagram Mounting Mounting Mounting direction Toshiba DVD-RAM SD-W1111 M3 screw Drive Frame 3.5mm Standard Bezel Front bezelLED lighting Disc is not loaded, all LED’s turn off Rear View and Connectors Power supply connector 12.2 I/F connector Scsi connector Pin No. table of connector terminal External view diagram Signal interface Mode select headers functions Scsi ID settingParity check setting Verify setting Termination setting Audio ConnectorChange of setting Scsi command set Host interface specificationApplicable standard Read Write Error report in a write cache operation Automatic sector replacement at a write operationError generation in Read Modify Write operation Disappearance of data in buffer in a write cache operation Toshiba DVD-RAM SD-W1111 Accessories Bare disc setting at vertical installation Toshiba DVD-RAM SD-W1111 Toshiba DVD-RAM SD-W1111 Disc eject at emergency Rev # 0.9a Deviation ListRev #