Toshiba | Toshiba SD-W1111 instruction

TOSHIBA

DISK PRODUCTS DIVISION

SD-W1111

DVD-RAM DRIVE

PRODUCT SPECIFICATION

JUNE 1999

REV. 1.0

Specifications are subject to change without notice

DOCUMENT NUMBER

12043

Image 1

Toshiba SD-W1111 specifications Toshiba

Contents

Toshiba Toshiba DVD-RAM SD-W1111 Precaution 10.1 15.1 Scope Features External views and dimensions DVD-ROM Basic specifications ∙ Average seek time Operating time of Seek command Mechanical specifications Power supply specifications Environmental specifications Reliability specificationsError rate Temperature Vibration5 to 300 Hz Relative humidityAltitude Static electricity EN61000-4-6 EN61000-4-8 EN61000-4-11 9Blockdiagram Mounting Mounting Mounting direction Toshiba DVD-RAM SD-W1111 M3 screw Drive Frame 3.5mm Standard Bezel Front bezelLED lighting Disc is not loaded, all LED’s turn off Power supply connector Rear View and Connectors Pin No. table of connector terminal 12.2 I/F connector Scsi connector External view diagram Signal interface Scsi ID setting Mode select headers functionsParity check setting Verify setting Termination setting Audio ConnectorChange of setting Scsi command set Host interface specificationApplicable standard Read Write Automatic sector replacement at a write operation Error report in a write cache operationError generation in Read Modify Write operation Disappearance of data in buffer in a write cache operation Toshiba DVD-RAM SD-W1111 Bare disc setting at vertical installation Accessories Toshiba DVD-RAM SD-W1111 Toshiba DVD-RAM SD-W1111 Disc eject at emergency Rev # 0.9a Deviation ListRev #