M3 screw Drive Frame 3.5mm | Toshiba SD-W1111 specs

OD-A017-02

TOSHIBA DVD-RAM SD-W1111

‘99/06/26 Version 1.0

∙Do not apply force (under 1.5N : 150gf) caving in the top plate.

∙Use screws of which length inside the drive should be more than 2.5mm and less than 3.5 mm from the drive frame surface.

M3 screw

Drive Frame

2.5-3.5mm

Page 18

Product Specification

Image 18

Toshiba SD-W1111 specifications M3 screw Drive Frame 3.5mm

Contents

Toshiba Toshiba DVD-RAM SD-W1111 Precaution 10.1 15.1 Features Scope External views and dimensions Basic specifications DVD-ROM ∙ Average seek time Operating time of Seek command Power supply specifications Mechanical specifications Error rate Reliability specificationsEnvironmental specifications Temperature Altitude Relative humidityVibration5 to 300 Hz Static electricity EN61000-4-6 EN61000-4-8 EN61000-4-11 9Blockdiagram Mounting Mounting Mounting direction Toshiba DVD-RAM SD-W1111 M3 screw Drive Frame 3.5mm Front bezel Standard BezelLED lighting Disc is not loaded, all LED’s turn off Rear View and Connectors Power supply connector 12.2 I/F connector Scsi connector Pin No. table of connector terminal External view diagram Signal interface Parity check setting Mode select headers functionsScsi ID setting Verify setting Audio Connector Termination settingChange of setting Host interface specification Scsi command setApplicable standard Read Write Error generation in Read Modify Write operation Error report in a write cache operationAutomatic sector replacement at a write operation Disappearance of data in buffer in a write cache operation Toshiba DVD-RAM SD-W1111 Accessories Bare disc setting at vertical installation Toshiba DVD-RAM SD-W1111 Toshiba DVD-RAM SD-W1111 Disc eject at emergency Deviation List Rev # 0.9aRev #