Toshiba SD-W1111 specifications Accessories, Bare disc setting at vertical installation

	OD-A017-02
TOSHIBA DVD-RAM SD-W1111	‘99/06/26 Version 1.0

15. MISCELLANEOUS

15.1 Accessories

Function setting jumper pins	5 pieces.
Emergency eject tool	1 piece.

15.2 A bare disc setting at vertical installation

In case of using a bare disc (ex. DVD-ROM or CD-ROM) at vertical installation, use disc holders on the tray. Please read the following explanations thoroughly at this time.

1.Draw three disc holders among the four holders on the tray, two pieces are both holders in down side, one piece is on a rear part in upper side while made to vertical posture as follows.

(Note) Please use 3 pieces holders because the set of the disc becomes difficult when four disc holders are drawn out.

2.Drawing out a disc holder (pull return) can be easily done with inserting a propelling pencil ahead in the hole that is installed on the disc holder.

Page 30 Product Specification