43

NETWORK SETUP

Network Setup allows the user to adjust settings such as Ports, setup emergency PPP information for use with the Emergency Agent and enable Remote Access.

Settings for Video Sent to Remote Client

Use with

Emergency Agent

Use with Remote

Connections

 

Enable RS-232

Between DVR and Remote Client

 

Keyboards (PTZ)

Time Out Value

When attempting to connect to the DVR, if the connection does not succeed during the timeout

 

 

period (seconds), the connection will be terminated.

Emergency Port

Used to connect to the Alarm Monitor software.

Center Port

Used to connect to the Surveillix remote software. This port must be specified in the Remote

 

 

Software to connect to the DVR.

Note

Center Port 1025 is not available for remote connections. It is used by the ATI VGA management suite

Image Port

Used to transfer the video to the Surveillix remote software.

Search Port

Used to transfer search information to the Surveillix remote software.

Note If connecting to the DVR through a firewall, the above ports must be open to incoming and outgoing traffic.

ResolutionBy setting the resolution low, the images will be sent faster, however, the image quality will be reduced considerably. When set to Original, full quality video will be sent [720 x 480 (NTSC) 720 x 576 (PAL)]. The Original setting is very bandwidth intensive.

Transport Rate

Throttles the bandwidth on the DVR. This option is based on percentages of images sent.

Page 43
Image 43
Toshiba SWIP-16, SWIP-32, SWIP-8 user manual Network Setup