72
Using the On-Screen Compass
1.Click Setup on the Display screen.
2.Click PTZ.
3.Select the On Screen Compass check box to enable the feature.
4.Click Apply.
5.Click Exit to return to the Display screen.
6.Click PTZ.
7.Control the PTZ by dragging the mouse on the screen in the desired direction.
Note A green line will appear to show the direction the PTZ will move. The shorter the line the less the PTZ will move. The longer the line the more the PTZ will travel in the specified direction.
UNDERSTANDING TOURS
Travel Speed | The speed between one Preset position to the next |
Dwell Time | The length of time (in seconds) that a PTZ Tour displays a Preset Position. |
Setting: Start Pos / End Pos | Define a Mimic Tour. The Start Position button begins the ‘recording’ process. The Stop Position |
| button ends it. |
Pan Swing / Tilt Swing | This option enables the Horizontal (Pan) or Vertical (Tilt) ‘Guard Tours’. |
Run / Stop | Runs the selected Pan or Tilt Tour. |
