69

ADVANCED PTZ SETUP

PTZ signal type

Adjust Speed Settings

Connection Settings

Note Preset and Tour options may vary depending on the camera

Creating and Viewing Preset Positions

A Preset Position is a user-defined location where the camera can be pointed, zoomed in, and focused. Preset positions can be defined and labeled if the camera supports this.

Creating a Preset

1.Inside Setup, click PTZ and select the camera.

2.If the camera is already selected click Open PTZ Controller.

3.Move the selected camera to the desired position using the Pan/Tilt/Zoom/Focus controls.

4.In the Preset & Tour Detail section, choose a Preset # (1-10) using the list or the Right and Left Arrow buttons and click Select.

Note Preset positions can also be created using the advanced buttons on the PTZ graphical controller.

Viewing a Preset

1.From the Display screen select the PTZ camera by clicking on it.

2.Using the keyboard click the number keys corresponding with the Preset Positions. The camera will move to the saved Preset.

Page 69
Image 69
Toshiba SWIP-32, SWIP-16 Advanced PTZ Setup, Creating and Viewing Preset Positions, Creating a Preset, Viewing a Preset