Operations
(Continued)
AUTO SET 
ON/STANDBY
AUTO SET 
KEYSTONE
MARKER LASER
POINTER
PJ
MENU ENTER
RGB VIDEO CAMERA
RESIZE RESET FREEZE
FREEZE
MUTE CALL
CALL
MUTE
Adjusting the image automatically
An image which is flickering, blurred or is not centered, can be adjusted automatically.
Press AUTO SET.
The image is adjusted automatically.
2) Press MUTE again.
The picture is also cut off temporarily.
“” appears.
To restore, press MUTE again.
Note
If you press MUTE while the menu is displayed, the menu disappears.
Freezing the picture
Press FREEZE.
The picture freezes.
“ 
” mark appears on the screen.
To release the picture, press FREEZE again.
Any other operations can also release the picture.
Note
This function is convenient for the case where you are using the document imaging camera model and change documents to project through the camera.
CONTENTS | 23 |
Contents of displayed items
[ S t a t u s | ] |
I n p u t | : RGB |
S i g n a l | : XGA6 0 |
S c r e e n | : XGA6 0 |
S y n c h r o . : N / N
V e r . / r e v . : V 0 1 / R0 1
Current input source
Signal system of the input source Signal system automatically detected by the projector
(Mode determination 45
) Synchronizing polarity of input signal P=Positive N=Negative
Version number of software
Note
If you press CALL while the menu is displayed, the menu disappears.
To adjust further, make the “Image” adjustment on the menu. 31
Cutting off the picture and sound
temporarily
1)Press MUTE.
The sound is cut off temporarily. “ ” appears.
Displaying the input source
information
Press CALL.
The current input source and the signal status information is displayed.
To close the display, press CALL again.
(Continued)
