Operations
Operating the computer
by the remote control
If you connect the iREMOTE MOUSE RECEIVER to the computer, the supplied remote control can work as a mouse of the computer.
CONTENTS | 25 |
Notes
• To operate the projector and the computer by |
the remote control, place the REMOTE |
MOUSE RECEIVER close to the projector. |
• When connecting the REMOTE MOUSE |
Connecting the REMOTE MOUSE RECEIVER
Check that the power of the computer is turned off.
Connect the REMOTE MOUSE RECEIVER.
Remove the mouse actually used and change it to the supplied cable.
USB Mouse cable (supplied)
|
| IBM/MAC |
| PS/2 | ||||||||||
| Mouse cable | Mouse adapter | ||||||||||||
|
| (supplied) | (supplied) | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAC
Mouse adapter
(supplied)
REMOTE MOUSE RECEIVER (supplied)
USB
PORT
IBM PC
DOS/V
SERIAL
PORT
PS/2
MOUSE
PORT
Macintosh
MAC 
MOUSE PORT 
RECEIVER to an IBM PC/DOS V computer, |
use the supplied PS/2 mouse adapter if you |
are using a PS/2 mouse, or connect the |
supplied IBM/MAC cable directly to your |
computer if you are using a serial mouse. |
• When connecting the REMOTE MOUSE |
RECEIVER to the USB PORT for the first |
time, insert the “Windows98 |
install the device drivers for a USB |
interchangeability device and a USB human |
interface devices (two kinds). The installation |
starts automatically when you connect a USB |
mouse cable connected to the remote mouse |
receiver to the USB port of your computer. |
(Continued)
