Preparing the Remote Control
Inserting the Batteries
When using the remote control for the first time, install the batteries that were supplied.
1Slide the battery compartment cover (located on the bottom of the remote control) and pull off.
2Insert the batteries to match the "+" and
3(A) Leaving a little space in the front, close the lid, (B) then with the back pressed tightly, (C) press the lid towards the front.
(A)
(C)
*When replacing batteries, purchase two of the same type of AAA battery.
*DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
CAUTION
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Remote Control Range
(B)
Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit and operate.
Reception of the remote control signal should generally be possible within the range illustrated below.
4m/13. |
|
1 | feet |
|
30°
Remote control
sensor ° 30
20° | 20° | Remote control in- |
Side View |
| frared transmitter |
7m/23.0 feet
4m/13
. 1
feet
50° |
|
50° | Remote control in- |
| |
| frared transmitter |
7m/23.0 feet
Remote control sensor
Top View
Note
*Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or the obstruction of the signal by an obstacle located in the pathway may prevent operation.
*The remote control will not function when the battery is exhausted.
