Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Operating
1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The STANDBY indicator will light in amber, and the unit will enter the standby mode.
To wall outlet
STATUS STANDBY
AUTO
Lit amber
E CRUO S
Firmly plug in all the way.
2 Turn the lens cover clockwise.
When the lens cover stops with a click, the projector is ready for projection.
E | DN |
|
| YB | E |
|
| |
|
|
|
|
|
| |||
| TA |
|
| DN |
|
|
| |
| S |
|
|
| TAS |
|
| |
| S | TU | TAS |
|
|
|
| |
1 |
|
|
|
| US | AT |
| |
|
|
|
|
|
| ST | ||
|
|
|
|
|
|
|
| |
2
EM
3 Switch on the projector power
Press the STANDBY button.
STATUS STANDBY
(button on main unit)
The first time the power is switched on after purchase, [Menu Language Select] will be displayed. See Page
•When the power is turned on, the STANDBY indicator starts flashing green, then stops flashing after about 60 seconds. If the STATUS indicator lights green at this time, the lamp mode is set to “Eco”. See
•If the power does not come on, see “When the STATUS Indica- tor is Lit or Flashing” on Page
If the “Password” input window is displayed: See
The projector cannot be used unless the correct password is in- put.
To turn off the power: See
The projector is now capable of regular projection.
4 Switch on the power of the connected equipment
STANDBYLASER
RGB VIDEO AUTO
MENUQUICK
Q
This indicator is also lit green in Eco-mode.
STATUS STANDBY STATUS STANDBY STATUS STANDBY
| Flashing green | Lit green | |
Lit amber | (Approximately 60 | ||
Power is on | |||
| seconds) | ||
|
|
Note:
•When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached easily.
•Press the STANDBY button after the STANDBY indicator is lit in amber.
