Toshiba TDP-T420 owner manual Connection, Before connection

Connection

Before connection

•Read the owner’s manual of the device you are connecting to the projector.

•Some computers cannot be used with or connected to this projector. Check for an RGB output terminal, supported signal p.53 , etc.

•Turn off the power of both devices before connecting.

•The figure below shows sample connections. This does not mean that all of these devices can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Notes

• The MONITOR OUT terminal outputs analog RGB signals from the COMPUTER 1 IN

terminal or the COMPUTER 2 IN terminal, or outputs Y/PB/PR signals as selected with

the INPUT button. If no input is selected, the MONITOR OUT terminal outputs the input

signals last selected for each input terminal. (Digital RGB signals will not be output.)

• Signals are output from MONITOR OUT terminal even in standby mode.

However, from AUDIO OUT terminal, no audio signal is output.

• A computer monitor cannot accept Y/PB/PR signals correctly.

• The AUDIO (L/R) terminal doubles for devices connected to S-VIDEO terminal and

Computer

(for control)

To p.56 RS-232C terminal

Control cable

Computer

To RGB output

RGB cable (supplied)

Computer		Video recorder, etc.
		To DVI
		output	To video
		DVI cable 29-pin	output
		(not supplied)	Audio cable
To DVI output			(not supplied)
	To audio output
To audio output
	Audio cable
DVI cable 29-pin
(not supplied)	(not supplied)
Audio cable
(not supplied)

	VIDEO terminal.
•	When an AUDIO OUT terminal is connected, sound is not output from the projector
	speaker.
•	Output volume of AUDIO OUT terminal can be adjusted by the VOL button.

Preparations

S-video cable (not supplied)

	Audio cable
Audio cable	(not supplied)
	Monitor cable
(not supplied)

To audio input

White (L)/Red (R)

Audio amplifier, etc.

	Mini D-sub		To audio
Audio cable	15P-BNC	To Y/CB/CR	output
(not supplied)	(not supplied)		White (L)/
		output
			Red (R)
		Green (Y)/Blue
To audio		(CB)/Red (CR)	To S-video
		Conversion adapter
output			output
		BNC-pin (not supplied)
	Video recorder, etc.		Video recorder,
			DVD player, etc.

22 23