Lamp replacement (Continued)
4 Remove the inner lamp cover. |
| Notes and Precautions | |
Loosen the screw to remove the inner lamp cover. | Inner lamp cover | • The [Lamp time] item in the Status display menu indicates the time of lamp use (as a | |
rough guide) p.43 | |||
|
| ||
|
| • Please replace the lamp after 2000 hours of use with [Lamp power] in the Default | |
|
| setting 2 menu set to [Standard], and 3000 hours of use with [Lamp power] in the | |
|
| Default setting 2 menu set to [Low]. p.42 | |
|
| • There are cases that the lamp can not work before the above mentioned period expires | |
|
| or before the replacement message is displayed. | |
|
| • Attach the outer lamp cover correctly so that it is not loose. If it is not attached correctly, | |
|
| the projector may fail to be powered on or the lamp may fail to come on. | |
5 Pull out the lamp. |
| • Always replace the lamp with a new one. | |
| • The lamp is made out of glass. Do not touch the glass surface with your bare hands, | ||
Remove the 3 locking screws and carefully set them |
| bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.) | |
aside. Then pull up the handle and remove the lamp. |
|
| |
|
| About lamp replacement messages | |
|
| • The lamp replacement message of this projector displays an appropriate | |
|
| period according to the use period for [Standard] / [Low] of the [Lamp power] | |
|
| respectively. | |
|
| • When the replacement time approaches, the message of “The lamp life is ending. | |
| Tab | Please change the lamp.” is displayed every time the power is turned on. This | |
6 Mount the new lamp. |
| display disappears when you press the button. | |
|
|
Align the orientation, press down the new lamp until the bottom is reached, and lock in place using the 3 lamp locking screws.
7Replace the inner lamp cover.
Tighten the screw loosened in step 4 until the inner lamp cover is no longer loose.
Used Lamps
This projector’s lamps contain trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, and dispose of them in accordance with local regulations.
Maintenance
8Replace the outer lamp cover.
Align the cover and press it in. Then replace the screws you removed in step 3 , and tighten them
until the lamp cover is no longer loose. (Be sure to replace the outer lamp cover.)
9Reset the lamp time.
See the lamp’s manual for instructions on resetting the lamp time.
46 | 47 |
