Toshiba TDP-T9 Trouble indications, No power, Lamp went out during use, or won’t come on

Trouble indications

The indicator lights		inform you of interminal abnormalities.
POWER		No power
		⇒ Problem with projector
		• Unplug the power cord, and contact your dealer.
		Lamp went out during use, or won’t come on
POWER		⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of
		the lamp has ended or the projector is malfunctioning.
(Red lit)		•	Unplug the power cord and wait for a short while, then turn the power
	(Red lit)		back on.
		•	If a lamp burns out, replace it with a new one.
		❈ After approx. 5 second of abnormal display, the projector returns to
			the standby state waiting for internal cool down.

Power went out during use

⇒Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not

POWER	blocked.
•	Unplug the power cord and wait for a short while, then turn the power
	back on.

❈The icon will appear before the power goes out.

❈After approx. 5 second of abnormal display, the projector returns to the standby state waiting for internal cool down.

	Power went out during use
POWER	⇒ Problem with internal cooling fan.
	• Unplug the power cord, and contact your dealer.
FLASH	❈ The	icon will appear before the power goes out.
	❈ After approx. 5 second of abnormal display, the projector returns to
	the standby state waiting for internal cool down.

Power went out during use

⇒Problem inside the projector.

	POWER		•	Unplug the power cord and wait for a short while, then turn the power
				back on.
FLASH		FLASH	•	If the above action will not clear the problem, unplug the power cord,
				and contact your dealer.

❈The icon will appear before the power goes out.

❈After approx. 5 second of abnormal display, the projector returns to the standby state waiting for internal cool down.

Others

41