10
GB TOSHIBA TF 651
Enter user name
The following steps include entering the
name, the terminal identification, the
dialling procedure and the line type. These
settings should be made quickly, as the
maximum permitted pause between data
entry is approx. one minute. Take your
time therefore to read the information
concerning the name, identification,
dialling procedure and line type, and only
start the procedure when you have
finished reading.
If you have not entered all the data within
the permitted time, the details will not be
completely stored. In this case, repeat the
entire procedure again.
The transmission header not only contains
the terminal ID but also the user name.
This can contain up to 20 characters.
Each digit features several characters
which can be activated by repeatedly
pressing the corresponding key. If you
have found a character of your choice,
press the “#” key to got to the next
position. Use the “*” key to got back one
letter and make any corrections. Use the
“0” key to select special characters.
When the name is complete, press the
ENTER key.
Example: TOSHIBA
standby mode
Start the menu.
The first 4 menu items are displayed.
Select a menu item
Select a menu item
Make your selection

Enter the name

Example: TOSHIBA

1 x 8 = T # 3 x 4 = I #

3 x 6 = O # 2 x 2 = B #

4 x 7 = S # 1 x 2 = A

2 x 4 = H #

Confirm with ENTER
(continue with "Enter terminal ID")
Installation
R
15.03.95 19:56
RESIDUAL MEMORY 100%
R
1. TRAN SMIT
2. POLLING
3. OPTIONS
4. LISTS
1. LANGUAGE
2. DATE & TIME
3. JOURNAL
4. TTI
SET TERMIN AL ID
ID NAME =(MAX2 0)
TOSHIBA
LEFT:[*] RIGHT:[#]
SET TERMIN AL ID
LEFT:[*] RIGHT:[#]
ID NAME =(MAX2 0)
AUTO RX
MENU
ENTER
Installation