35 GB
TOSHIBATF 651
Transmit documents
Transmit documents
Load original
Remember:
Printed side face down
Document ready

Press one touch key

While documents are being read in:
Job number, current memory capacity
and corresponding page number are
displayed.
Load original
Remember:
Printed side face down
Document ready

Press CHAIN DIAL

Press the dialling numbers using a one-
touch key, abbreviated dialing number
(alphbet dial) and/or a dial keypad on the
operator control panel.

Make your choice

Confirm with START
While documents are being read in:
Job number, current memory capacity
and corresponding page number are
displayed.
ABB. DIAL
ALPHABET
RESIDUAL MEMORY 100%
STD
RESIDUAL MEMORY 100%
STD
TEL NUMBER =(MAX128)
AUTO RX
AUTO RX
NORMAL

Broadcast with one touch

Chain dialling operation
Allows you to dial locations that may
require more than 38 digits. For example:
Long distance caariers and specialized
access lines. After you have stored the
number, you can transmit as follows.
Before you can this feature, you must
assign the number to be used for chain
dialing to a one-touch key.
The total sum of digits dialed (access +
number + ID) can not exceed 128 digits. CHAIN DIAL
START
NORMAL
CHAIN DIAL