69 GB
TOSHIBATF 651
Possible problems
Error messages in theDisplay
Your fax machine reports an operating error or
fails to perform the required function. Before
you make an unnecessary call on your service
technician, take your time and see if you can
help yourself. This checklist will help
you recognise and eliminate errors.
Press STOP to clear error
messages.
How to correct
Remove the paper and press RESET.
Load new recording paper in the cassette
(see page 5). Do not switch the machine
off!. Or data in the memory will lost
Remove the jammed paper (see
page 73).
Close the cover. Have you inserted the
process unit correctly?
Install the process unit correctly. Pull the
lock forward.
Order a new process unit from your
TOSHIBA dealer.
Replace the process unit
Order a new toner cartridge. Install a new
toner cartridge. About 100 sheets can be
printed after this is displayed (see
page 6).
Install a new cartridge (see page 6).
Contact your dealer, as a memory
expansion is available. Use the document
tray to transmit documents.
The action requires a document.
Contact the TOSHIBA dealer
Try to solve the problem according to the
next pages.
Refer to manual
Check number. Did you use * in PABX?
Ask other party to send again
Press RESET and check qty.
Add Paper. Documents will be printout
automaticly
Check code
Cause
Documents have jammed in the document
feeder.
The recording paper cassette is empty
The recording paper has jammed.
The cover is open.
The process unit is not installed.
The process unit is running out.
The process unit is empty
The toner is runnnig out
There is not enough toner for printing
The memory is full
No document present
The fax machine has malfunctioned
Transmission error.
A function was selected, wich is not possible at
the moment.
Other party was busy
After memory reception machine was switched
off
Page counter and actual documents are diffe-
rent
Documents had been received into the memory
The security code was wrong

Display

DOCUMENT JAM
PAPER EMPTY
PAPER JAM
COVER OPEN
CONFORM PROCESS UNIT
DRUM LIFE WARNING
REPLACE DRUM
TONER LOW
TONER EMPTY
MEMORY OVERFLOW
PUT IN DOCUMENT
MEMORY FAILURE
COMMUNICATION ERROR
NOT POSSIBLE
LINE BUSY
MEMORY REC. LOST
PAGE# MISMATCH
MEMORY RECEPTION
POLLING ERRROR
Possible problems