6
GB TOSHIBA TF 651
Preparation
How to install theprocess unit:In order to transport or move the
machine the toner pack and the
process unit has to be removed.
To make a goodimpression: The tonerpackIn order to prevent transport damage, the high-
quality process unit of your new fax machine is
delivered in special packaging to provide
additional protection. Please follow the
enclosed instructions. This is how to install the
unit:
Open the top cover
by pressing the release button.
Install the process unit...
by inserting the pins into the lateral guides and
then, by applying slight pressure, lower it into
the correct position.
A damaged drum will affect the copy
quality. Therefore: Never touch the
drum surface or expose the drum to
sunlight for more than three minutes.
When installing the machine for the first time or
later when the message TONER LOW or TONER
EMPTY is displayed, you must replace the toner
pack in your fax machine. At the same time also
replace the fixer cleaner.
When replacing toner:
Release the green stopper and pull the pack out
of its support in the direction of the arrow, as
shown.
When installing for the first time:
Unpack the toner pack supplied.
Do not touch any sensitive parts of the printer
system.
First shake the new toner pack,
insert in the direction of the arrow and slide
forward.
Now remove the seal.
When holding the protective foil, be sure to
avoid contact with any toner residue.