Before use

(Continued)

Notes

•The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor.

•Operate the remote control from a position where the remote sensor is visible.

•Do not drop the remote control or otherwise jolt it.

•Keep the remote control out of locations with excessively high temperature or humidity.

•Do not get water on the remote control or place wet objects on it.

•Do not disassemble the remote control.

•Under unusual circumstances the remote control may not operate well due to the location being used or the surroundings. At such times, change the direction of the remote control to the projector and retry the operation.

13

Power supply cord selection

If your line voltage is 220 to 240, use one of the following types of cable.

In Singapore, use the UK type plug cable. (The UK type plug [MP5004] of this model is approved by PSB.)

Plug

 

configuration Plug type

Line voltage

EURO

220 – 240V

UK

220 – 240V

Use a 5A fuse which is approved by ASTA or

BSI to BSI362.

Always replace the fuse cover after changing the fuse.