Connections and installation

(Continued)

1 Place the projector on a steady, level surface such as a table.

Point the projector squarely at the screen for the best possible picture.

Top view

Screen

90°

2 Adjust the distance between the lens and the screen.

The projection size depends on the distance between the lens and the screen.

Adjust the projection size by changing the distances as shown below.

Screen

Lens

90°

b

a

17

3 Connect the power cord.

•Insert one end in the AC IN socket on the projector.

•Insert the other end in a wall outlet.

To a wall outlet.

The ON indicator lights in orange and the projector turns to standby mode.

4 Take off the lens cover.

Point the lens straight at the center of the screen as above.

Side view

Screen

90°

Place the projector horizontally so that the projecting light hits the screen squarely.

a:Distance between the lens and the screen

b:Distance between the lens height and the bottom of projection area

 

a (m)

 

Screen size

Minimum

Maximum

 

(inches)

(WIDE)

(TELE)

b (cm)

23

–

1.132

4

40

1.56

2.017

6

60

2.373

3.059

9

80

3.186

4.1

12

100

3.999

5.142

15

150

6.031

7.746

23

200

8.064

10.35

30

250

10.096

–

38

• The values are approximations.

(Continued)