Operations

Picture projection

CAUTION

Do not look into the projection lens while operating the projector.

Preparation

•Install and connect the projector properly.

•Take off the lens cover.

 

SELECT/ADJUST

 

 

 

ON

ON/STANDBY MENU

ENTER

INPUT

 

 

LAMP

 

 

TEMP

1

 

 

3 Indicators

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 4

 

 

ON/

1

CALL

 

STANDBY

 

 

RGB

VIDEO

 

AUTO SET KEYSTONE

RESIZE

3

FREEZE

MUTE

MARKER

 

MENUENTER

-+

RESET

1 Press ON/STANDBY.

Both the ON and LAMP indicators light up in green.

ONON

On (Green)

On (Green)

LAMPLAMP

Flashing (Green)

On (Green)

2 Turn on the connected equipment and put it in playback mode.3 Select the input source.

(On the control panel of the main unit) Press INPUT repeatedly.

Each time the button is pressed, the source indication on the screen changes as follows:

 

 

 

 

 

19

 

 

→ RGB:

 

To project pictures from a

 

 

 

 

 

 

computer connected to RGB

 

 

 

→

 

INPUT or a video equipment

 

 

 

 

with component video

 

 

 

 

 

 

 

 

 

 

output jack.

 

 

 

Video:

 

To project pictures from a

 

 

 

 

 

video equipment, etc.

 

 

 

→

 

connected to VIDEO jack of

 

 

 

 

 

VIDEO INPUT.

 

 

 

Y/C:

 

To project pictures from a

 

 

 

 

 

 

 

 

video equipment, etc.

 

 

 

 

 

connected to S-VIDEO jack

 

 

 

 

 

of VIDEO INPUT.

(On the remote control)

RGB:

Press RGB.

Video/Y/C:

Press VIDEO.

 

 

 

 

 

Each time the button is

pressed, Video/Y/C is switched.

4 Adjust the picture size by turning the zooming ring.

Turn to the right to enlarge the picture.

Turn to the left to reduce the picture.

5 Focus on the picture by turning the focusing ring.

A still picture is recommended for focusing.

(Continued)