Manuals / Brands / Computer Equipment / Projector / Toshiba / Computer Equipment / Projector

Toshiba TLP-MT3E Settings and adjustments on, the menu, Save30, Image27, Audio29, Picture28, Default24, Keystone26, Adjustments

1 43

Download 43 pages, 631.2 Kb

Adjustments

Settings and adjustments on

the menu

Most of adjustments and settings are made on the menu.

To display the menu, press MENU.

The followings are adjustments and settings on the menu. For details, see page in 29.

When using this projector for the first time, see “Default”. 24

Keystone26

Auto set : To correct the keystone distortion automatically.

Adjust : To make the correction of keystone distortion beyond the automatic correction.

Image27

Auto sync. : To adjust the image automatically.

Phase : To adjust the phase.

H-position : To shift the image position horizontally

V-position : To shift the image position vertically.

Clock : To adjust the clock frequency.

Picture28

Contrast : To adjust the contrast.

Brightness : To adjust the brightness.

Color : To adjust the color depth.

Tint : To adjust the tint.

Sharpness : To adjust the sharpness.

R-level : To adjust the amount of red in the picture.

G-level : To adjust the amount of green in the picture.

B-level : To adjust the amount of blue in the picture.

Audio29

Volume : To adjust the sound volume of the speaker.

Bass : To adjust the bass of the sound output.

Treble : To adjust the treble of the sound output.

23

Default24

Language : To select the language for displays.

Proj. mode :To set the projecting orientation according to the way of installation.

RGB input : To set the signal type of RGB input.

Video signal : To set the signal type of video input.

Scrn display : To use or disable on-screen displays.

Save30

Save data : To save the adjustments and settings on the menu.

All preset : To restore the adjustments and setings on the menu to the factory set.

Contents

Page Before use WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY Save Original Packing Materials Avoid Volatile Liquid Moisture Condensation CAUTION: PLEASE READ AND OBSERVE 1.Read Owner’s Manual 2.Power Sources 3.Source of Light 4.Ventilation 5. Heat 7. Cleaning 9. Overloading 6.Water and Moisture 8.Power-CordProtection 11.Object and Liquid Entry 12.Do not place the product vertically 13.Stack Inhibited 14.Attachments 15.Accessories 16. Damage Requiring Service 17. Servicing 19. Safety Check 18.Replacement Parts Contents Part names and functions Main unit Left side Rear side Right side Remote control Installing batteries Remote control operation Power supply cord selection Connections Connecting video equipment Output terminals Connecting an IBM PC or compatible computer (DOS/V) Connecting a Macintosh computer Projector placement 1 Place the projector on a steady, level surface such as a table 2 Adjust the distance between the lens and the screen 3 Connect the power cord 4 Take off the lens cover How to use the foot adjuster Picture projection Turning the power off Correcting the keystone distortion Adjusting the image automatically Freezing the picture Displaying the input source information Cutting off the picture and sound Changing the picture size Settings and adjustments on the menu Initial settings – Default 5 Press MENU Keystone correction – Keystone 0 degrees setting for the automatic keystone correction Projection adjustments – Image Picture adjustments – Picture Sound adjustments – Audio Saving data – Save Trouble indications Air filter, lens and main unit cleaning Cleaning the lens Cleaning the main unit Cleaning the air filter Lamp replacement Before calling service personnel Page Input signal Mode determination and signal system Page Signal assignment RGB signal defaults Adjustments with RS-232C Command list Interface format Page Specifications Liquid crystal display Projection lens Accessories