Toshiba TLP-MT3E Connections, Connecting video equipment, Output terminals, Note, Notes, 14Connections and installation

14Connections and installation

Connections

Connecting video equipment

Check that the power for the projector and computer is off before connecting the cables.

	(not supplied)	To PR(CR) output
	Audio cable (not supplied)	To PB(CB) output
	To audio output R
	(red)	To Y output
	To audio output L
	(white)
To RGB	To RGB
INPUT	INPUT
(RGB)	(AUDIO)

Output terminals

Check that the power for the projector and computer is off before connecting the cables.

RS-232C	RGB	RGB	AUDIO
CONTROL	MONITOR		RGB INPUT
	VIDEO INPUT
	-VIDEO	VIDEO	L - AUDIO -R

You can connect an extra monitor to view the picture.

		Video player with component video outputs
RS-232C	RGBAUDIORGB	AUDIO
CONTROL	MONITOR OUTPUT	RGB INPUT
	VIDEO INPUT	To VIDEO INPUT (VIDEO) (yellow)
	S-VIDEO VIDEO	L - AUDIO -R
To VIDEO		To VIDEO INPUT (AUDIO L) (white)
		To VIDEO INPUT (AUDIO R) (red)
INPUT
(S-VIDEO)		Audio/Video cable
		(supplied)
S-VIDEO cable		To Video output	Connecting to SCART socket
(not supplied)		(yellow)	To SCART
		To Audio output		white red
			socket

You can connect a computer to control the projector. 40

Audio cable (not supplied)

To MONITOR OUTPUT (AUDIO) ø3.5mm STEREO mini plug (Audio output level is constant.)

To audio input

	(white)
	To Audio output	Adapter for
		SCART socket
To S-VIDEO output	(red)
		(supplied)	yellow

Video tape player

Note

Several video equipments can be connected to the S-VIDEO jack and VIDEO jack separately.

Connect a stereo system for dynamic sound.

Notes

•Sound of the source which you select is output to the connected stereo system, etc.

•The MONITOR OUTPUT (RGB output) connector always sends out a signal which is input to the RGB INPUT (RGB input) connector regardless of your source selection.

•Even while the projector is in standby mode, the MONITOR OUTPUT

(RGB output) connector continues its output. (Continued)