Toshiba TV-GEN-03 specifications End of the line? Specifications, Screen Zone Size, Don’t Worry

TOSHIBA PJTV

Digital Convergence Alignment

End of the line? Specifications

Once all conceivable picture size modes have been aligned, verify the convergence meets factory specifications. The specifications listed in Table 2 reflect the maximum allowable misconvergence, in any direction, referencing either red or blue to green.

Screen					Zone
Size
	A	B	C	D	E	F	G	H	J
40	0.5mm	3.5mm	2.5mm	3.5mm	2mm	3.5mm	2.5mm	3.5mm	2mm
42	0.5mm	3.5mm	2.5mm	3.5mm	2mm	3.5mm	2.5mm	3.5mm	2mm
43	0.5mm	3.5mm	2.5mm	3.5mm	2.5mm	3.5mm	2.5mm	3.5mm	2.5mm
48	0.5mm	4mm	3mm	4mm	3mm	4mm	3mm	4mm	3mm
50 (4:3)	0.5mm	4mm	3mm	4mm	3mm	4mm	3mm	4mm	3mm
50(16:9)	0.5mm	3.8mm	2.7mm	3.8mm	2.3mm	3.8mm	2.7mm	3.8mm	2.3mm
53	0.5mm	4.5mm	3.2mm	4.5mm	3.2mm	4.5mm	3.2mm	4.5mm	3.2mm
55	0.5mm	4.5mm	3.2mm	4.5mm	3.2mm	4.5mm	3.2mm	4.5mm	3.2mm
56	0.5mm	4.5mm	3mm	4.5mm	2.5mm	4.5mm	3mm	4.5mm	2.5mm
57	0.5mm	4.5mm	3mm	4.5mm	2.5mm	4.5mm	3mm	4.5mm	2.5mm
61	0.5mm	5mm	3.5mm	5mm	3mm	5mm	3.5mm	5mm	3mm
65	0.5mm	5mm	3.5mm	5mm	3mm	5mm	3.5mm	5mm	3mm
71	0.5mm	5mm	3.5mm	5mm	3mm	5mm	3.5mm	5mm	3mm

Table 2

Zones A through J are the areas of the screen referenced by the specifications. The zones are illustrated in Figure 4.

H Q J K B

G P A L C

F N E M D

Figure 4

If the convergence cannot be aligned to factory specifications, further troubleshooting is required.

Don’t Worry:

Beginning with the 2002 production year, HD Compatible units include a service feature that allows a qualified technician to restore factory convergence data from a back-up memory location.

Module No. TV-GEN-03

Page 6 of 20