52 Getting Started
Adding memory
5.375 x 8.375 ver 2.3
Sample inserting the memory module into the slot
The clips on either side of the memory module will click
to secure the memory module.
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
12 Replace the memory module slot cover and tighten the
screw.
13 Turn the computer over and restart it.
You can now continue setting up the computer. When the
operating system has loaded, you can verify that the
computer has recognized the additional memory module.
If you are adding an extra memory module after setting up the
computer, verify that the computer has recognized it correctly
as described in “Checking total memory” on page 54.
Removing a memory module
If you need to remove a memory module:
1Complete steps 16 in “Installing a memory module” on
page 49 to shut down the computer and open the memory
module slot cover.