70 Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
Sample connecting the Toshiba Mini RGB Adapter to the
RGB (monitor) adapter port
2Connect the device’s power cable to a live electrical
outlet.
3Turn on the external device.
4Set the display mode by pressing Fn + F5, or by
configuring the Display Properties settings.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (Fn + F5):
1Press Fn and F5 simultaneously.
2While holding down Fn, press F5 repeatedly until the
setting you want takes effect. Briefly pause between
pressing the F5 key to allow time for the display to
change.
This hot key cycles through the settings in the following
order:
Built-in display only
Built-in display and external monitor simultaneously
External monitor only