29
Digital settings continued – software upgrade
SOFTWARE UPGRADE
Version 1.0
Auto upgrade ON
Search for New Software OK
0-9Enter PIN MENU
Back
EXIT
Watch TV
This feature can be used to check the version of software
currently installed.

Version

If Auto upgradeis selected the software will
automatically update as each version becomes available,
provided the television is on or in standby. If the television
is on, a screen prompt will appear showing the software
download taking place.

Auto Upgrade

1
From the FEATUREMENU press Por Qto
select Software upgrade. Press OK.
2
Press Por Qto select Version. Use Sor Rto
select. When the software has been updated there
will be a choice of two versions available.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for
this TV.
Searching
EXIT
Stop
NOUPGRADE AVAILABLE
! There is no upgrade available
at this time.
Continue
1
2
In the SOFTWARE UPGRADEmenu press Por
Qto select Auto upgrade.
Use Sor Rto select ONor OFF.
If preferred, software upgrades can be searched for
manually using Search for New Software.

Searching for new software

1
In the SOFTWARE UPGRADEmenu press Por
Qto select Search for New Software.
2
Press OK. The television will automatically start
searching for a software upgrade, the progress bar
will move along the line.
If an upgrade is found the television will
automatically start downloading, if not a screen
will appear stating that an upgrade is unavailable.
SOFTWARE UPGRADE
Version 1.0
Auto upgrade OFF
Search for New Software OK
0-9Enter PIN MENU
Back
EXIT
Watch TV
FEATURE MENU
Favourite and Locked Programmes OK
Favourites ALL PROGS
Common Interface Slots
NO MODULE
Software Upgrade OK
Encrypted Programmes OFF
MENU
Back
EXIT
Watch TV
gg