TOSHIBA WT200
A recovery image of the software on your computer is stored on the Solid State Drive, and can be copied to either disc media or USB Flash Memory by using the following steps:
1.Select either blank disc or USB Flash Memory.
The application will allow you to choose from a variety of different media onto which the recovery image can be copied including disc media and USB Flash Memory.
Please note that some of the disc media may not be compatible with the optical disc drive connected to your computer. You should therefore verify the optical disc drive supports the blank media you have chosen before proceeding.
USB Flash Memory will be formatted and all the data in the USB Flash Memory will be lost when proceeding.
2.Turn on your computer and allow it to load the Windows 7 operating system from the Solid State Drive as normal.
3.Insert the first blank disc into the external optical disc drive, or Insert the USB Flash Memory into one available USB port.
4.Double tap the Recovery Media Creator icon on the Windows 7 desktop, or select the application from Start Menu.
5.After Recovery Media Creator starts, select the type of media and the title you wish to copy, and then tap the Create button.
Restoring the
A portion of the total Solid State Drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore
If you subsequently set up your Solid State Drive again, do not change, delete or add partitions in a manner other than specified in the manual, otherwise you may find that space for the required software is not available.
In addition, if you use a
If the
When the sound mute feature has been activated, be sure to disable this to allow sounds to be heard before starting the restore process.
You can not use System Recovery Options if restoring the
User's Manual |