TOSHIBA WT200

ProblemProcedure

USB device does not Remove the USB device from the computer and

workthen reconnect it to a free port in order to ensure it is firmly attached.

Ensure that any required USB device drivers are properly installed - to achieve this you should refer to both the device documentation and the operating system documentation.

Sound system

In addition to the information in this section, please also refer to the documentation supplied with your audio device.

Problem

Procedure

No sound is heard

Adjust the volume.

 

To increase the volume press the volume up

 

button, and to decrease it press the volume down

 

button.

 

Check the software volume settings.

 

Please check to see if Mute is turned to Off.

 

Check to make sure the headphone connection is

 

secure.

 

Check within the Windows Device Manager

 

application to ensure the sound device is enabled

 

and that the device is properly working.

 

 

Annoying sound is

In this instance you may be experiencing feedback

heard

from either the internal microphone or an external

 

microphone connected to the computer - please

 

refer to Sound System in Chapter 3, Operating

 

Basics for further information.

 

Volume cannot be adjusted during Windows start

 

up or shut down.

 

If you are still unable to resolve the problem,

 

contact TOSHIBA Support.

 

 

External monitor

In addition to the information in this section, please also refer to the documentation supplied with your monitor.

User's Manual

6-8