TOSHIBA WT200
Real Time Clock
ProblemProcedure
The BIOS setting and system date/ time are lost.
The charge in the Real Time Clock (RTC) battery has run out - you will need to set the date and time in the BIOS setup application by using the following steps:
1.Turn off the computer.
2.Press and hold on the Volume down button and then slide the Power switch. When the TOSHIBA Leading Innovation >>> logo screen appears - the BIOS setup application will load.
3.Set the date in the System Date field.
4.Set the time in the System Time field.
5.Follow the
Apparent computer's display panel problems may be related to the computer's setup and configuration - please refer to the HW Setup section in Chapter 4, Utilities & Advanced Usage, for further information.
Problem | Procedure |
Markings appear on | These marks may have come from contact with the |
the computer's | touch screen. You should try to remove the marks |
display panel. | by gently wiping the display panel with a clean dry |
| cloth or, if this fails, with a good quality LCD screen |
| cleaner. In this latter instance you should always |
| follow the instructions with the screen cleaner and |
| always ensure you let the display panel dry |
| properly before closing it. |
|
|
Problem | Procedure |
Computer does not | Check the Boot Priority setting within the |
boot from Solid State | TOSHIBA HW Setup utility - please refer to the |
Drive | Boot Setting section in Chapter 4, Utilities & |
| Advanced Usage for further information. |
|
|
User's Manual |