TOSHIBA WT200
To connect a USB device, plug the device’s connector into the USB port on your tablet.
Make sure the connector is properly aligned with the socket. Do not try to force the connection, doing so can damage the connecting pins.
As the port operation of all USB devices has not been confirmed, some USB devices may not function properly.
HDMI
The tablet is equipped with a Micro HDMI port that can send video by connecting with external devices. 1080p, 720p, 576p and 480p signal formats are supported, but actually available signal format depends on each HDMI device.
To connect external devices, follow the steps as detailed below:
As the port operation of all HDMI
1.Plug Type D connector of the HDMI cable into the Micro HDMI port on your tablet.
2.Plug the other end of the HDMI cable into the HDMI port of the HDMI device.
Figure
1
2
1. Micro HDMI port | 2. Micro HDMI (Type D) connector |
Please connect or disconnect an HDMI display device to or from the tablet under the following conditions:
The tablet is turned on.
The tablet is completely turned off.
Do not do so when the tablet is in Sleep Mode.
When you connect a television or external monitor to the HDMI port, the display output device is set to HDMI.
User's Manual |