TOSHIBA WT200
Problem
AC adaptor doesn’t power the computer (Power indicator does not glow white)
Procedure
Check the connections to make sure that the power cord/adaptor is firmly connected to the computer and a working power outlet.
Check the condition of the cord and terminals. If the cord is frayed or damaged it should be replaced, while if the terminals are soiled, they should be cleaned with a clean cotton cloth.
If the AC adaptor still does not power the computer, you should contact TOSHIBA Support.
Battery
If you suspect a problem with the battery, you should check the status of the Power indicator as well as the Battery indicator.
Problem | Procedure |
Battery doesn’t | The battery may be discharged - connect the AC |
power the computer | adaptor to recharge the battery. |
|
|
Battery doesn’t | If the battery is completely discharged, it will not |
charge when the AC | begin charging immediately, in these instances you |
adaptor is attached | should wait a few minutes before trying again. If |
(Battery indicator | the battery still does not charge, you should check |
does not glow | that the power outlet the AC adaptor is connected |
amber). | to its supplying power - this can be tested by |
| plugging another appliance into it. |
|
|
| Check whether the battery is hot or cold to the |
| touch - if so, it will not charge properly and should |
| be allowed to reach room temperature before you |
| try again. |
|
|
Battery doesn’t | If you frequently recharge a partially charged |
power the computer | battery, the battery might not charge to its full |
as long as expected | potential - in these instances you should fully |
| discharge the battery and then attempt to charge it |
| again. |
|
|
| Check the Power saver option under Select a |
| power plan in the Power Options. |
|
|
User's Manual |