TOSHIBA WT200

Volume cannot be adjusted during Windows Setup.

Slide the computer's power switch to power on.

Figure 1-4 Turning on the power

1

1. Power switch

Starting up for the first time

The Windows 7 Startup Screen will be the first screen displayed when you turn on the power. Follow the on-screen instructions on each screen in order to properly install the operating system.

When it is displayed, be sure to read the Software License Terms carefully.

Turning off the power

The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode.

Shut Down Mode

When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on.

1.If you have entered data, either save it to the Solid State Drive or to other storage media.

Never turn off the power while an application is running. Doing so could cause loss of data.

Never turn off the power, disconnect an external storage device or remove storage media during data read/write. Doing so can cause data loss.

In any emergency case, you can also slide the power switch for about six seconds to force power off.

2.Tap Start.

User's Manual

1-5