Toshiba X200, X205 Using the TouchPad™, try again, direction, Using the TouchPad™, “Installing a memory module” on page

56	Getting Started
	Using the TouchPad™

If the computer does not recognize the memory configuration, turn off the computer and remove the memory module slot cover (complete steps 1-8in “Installing a memory module” on page 48), and then check that the module is inserted completely into the socket and lined up squarely with the socket latches.

NOTE	From time to time, Windows® will display a pop-up that says,
	“Windows® needs your permission to continue.” This is a security
	feature to prevent programs or people from doing things on your
	computer without your permission. If you were trying to perform the
	action, click Continue; otherwise, click Cancel. If unsure, cancel and
	try again.

Using the TouchPad™

The TouchPad™, the small, smooth, square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you would like to move the cursor:

❖To move the cursor to the top of the page, push your finger forward on the TouchPad.

❖To move the cursor to the bottom of the page, drag your finger toward yourself.

❖To move the cursor to the right side of the page, slide your finger across the TouchPad from left to right.

❖To move it to the left side, slide your finger from right to left.

NOTE	Because the TouchPad is much smaller than the display screen,
	moving your cursor across the screen often means having to move
	your finger several times across the TouchPad in the preferred
	direction.

Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons.