58

Getting Started

Using the Dual Mode Pad
Using the Virtual Buttons

The Dual Mode Pad has six virtual buttons and a volume control

bar. Each virtual button can be configured to start an application.

The volume control bar is used to adjust the system volume level.

Virtual

Mode switch

buttons

button

 

 

Volume

 

control

 

bar

Virtual buttons

(Sample Illustration) Virtual buttons on the Dual Mode Pad

NOTE

Activating the Dual Mode Pad will deactivate an external mouse.

 

 

The virtual buttons at the top of the Dual Mode Pad have the following default settings:

Left button: Opens the assigned email application

Middle button: Opens the ConfigFree utility (see the Toshiba online Help for more information)

Right button: Opens the Windows® Photo Gallery

The other three virtual buttons have no default settings. You must configure these buttons in the Mouse Properties dialog box before they can be used.

In order to use the virtual buttons you must first enable Dual Mode in the Mouse Properties dialog box. After that, you can use the virtual buttons as follows:

1Tap the mode switch button to enable the virtual buttons.

2Tap the virtual button assigned to the application you wish to launch, or slide your finger on the volume control bar to adjust the volume to the desired level.

3When the operation is complete, the Dual Mode Pad automatically disables the virtual buttons.

The virtual buttons cannot be used until the mode switch button is tapped again.