TD-W8901G

54M Wireless ADSL2+ Modem Router User Guide

Figure 4-34

¾Filter Type Selection: Select the filter type for the configuration below.

¾IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes.

¾Interface: Select the interface for the entry.

)Note:

If select PVC0~PVC7 as an interface, the filter will match the IP traffic of WAN port with specified IPs (Source IP Address and Destination IP Address). If select LAN as an interface, the filter will match the IP traffic of LAN port with specified IPs.

¾Direction: Select the direction for this IP Filter rule. There are three filtering directions: Both, Incoming, Outgoing.

43

Page 50
Image 50
TP-Link TD-W8901G manual 54M Wireless ADSL2+ Modem Router User Guide