TL-R4000Enterprise Broadband Router User Guide

compatible with your ISP, if you are given another way not listed here, refer to Network->WANfor detailed list. Click Next to enter the necessary network parameters.

If you choose "PPPoE", you will see this page shown in Figure 3-7:

Figure 3-7 Quick Setup - PPPoE

¾Account Name and Password - Enter the Account Name and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP.

If you choose " Dynamic IP", the router will automatically receive the IP parameters from your ISP without needing to enter any parameters.

If you Choose "Static IP", the Static IP settings page will appear, shown in Figure 3-8:

Figure 3-8 Quick Setup - Static IP

)Note:

The IP parameters should have been provided by your ISP.

¾IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP). Enter the IP address into the field.

¾Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0.

¾Default Gateway - Enter the gateway into the box if required.

¾Primary DNS - Enter the DNS Server IP address into the boxes if required.

¾Secondary DNS - If your ISP provides another DNS server, enter it into this field.

Click the Next button, then you will see the Finish page:

8