Figure
¾User Name - Enter the user name for 802.1x authentication provided by your ISP
¾Password - Enter the password for 802.1x authentication provided by your ISP. Click the Login button to start 802.1x authentication.
Click the Logout button to end 802.1x authentication.
2.If you choose Static IP, you should have fixed IP parameters specified by your ISP. The Static IP settings page will appear, shown in Figure
Figure
You should type the following parameters into the spaces provided:
¾IP Address - Enter the IP address in
¾Subnet Mask - Enter the subnet Mask in
¾Default Gateway: (Optional) Enter the gateway IP address in
¾MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.
¾Primary DNS - (Optional) Type the DNS address in
¾Secondary DNS - (Optional) Type another DNS address in
14