TP-Link TL-R4000 TL-R4000, 4.8 Static Routing, TL-R4000 Enterprise Broadband Router User Guide

TL-R4000Enterprise Broadband Router User Guide

¾Host IP Address - The IP addresses that are blocked by DoS are displayed here.

¾Host MAC Address - The MAC addresses that are blocked by DoS are displayed here.

To update this page and to show the current blocked host, click on the Refresh button. Click the Clear All button to clear all displayed entries. After the table is empty the blocked host will regain the capability to access the Internet.

Click the Return button to return to the Advanced Security page

4.8 Static Routing

A static route is a pre-determined path that network information must travel to reach a specific host or network. This page displays the Static Routing table, you can operate it in accord with your desires.

Figure 4-37 Static Routing

When you want to add or modify a Static Routing, you can click the Add New button or Modify button, and then you will go to the next page. This page is used for adding or modifying a Static Routing.

Figure 4-38 Add or Modify a Static Route Entry

To add static routing entries:

1.Click the Add New.. button.

2.Enter the following data:

37