TL-R4000Enterprise Broadband Router User Guide

)Note:

1)Only the PC(s) on your LAN can use the MAC Address Clone feature.

2)If you click the Save button, the router will prompt you to reboot.

4.4.4Bandwidth Control

You can control bandwidth of each LAN port on this page. This feature can be used for distributing flexibly Internet resource.

Figure 4-11 Bandwidth Control

¾LAN - LAN port number. LAN1 point to LAN port 1, LAN2 point to LAN port 2, and so on.

¾Bandwidth - Select the bandwidth value from 128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps and 8Mbps. The selected value is the maximum Internet bandwidth for the LAN port. No-limitmeans no bandwidth limit.

4.4.5VLAN

On this page, you can configure VLAN modes in the VLAN Mode pull-down list: default is One VLAN.

based on LAN port. There are three VLAN One VLAN, Two VLAN and Four VLAN, the

Figure 4-12 VLAN Settings

¾One VLAN - In this VLAN mode, all LAN ports are in one VLAN, all LAN ports can communicate with each other.

¾Two VLANs - In this VLAN mode, the LAN1 and LAN2 are in one VLAN, and the LAN3 and LAN4 are in another VLAN. So LAN1 can communicate with LAN2 and LAN3 can communicate with LAN4, but LAN1 or LAN2 cannot communicate with LAN3 or LAN4.

¾Four VLANs - In this VLAN mode, all ports are in different VLANs. So they cannot communicate with each other.

18