UDP, or ALL (all protocols supported by the router).
¾Status - The status of this entry, "Enabled" means the Port Triggering entry is enabled, while “Disabled” means the Port Triggering entry is disabled.
¾Modify - The hyperlink (Modify” and “Delete”) of the Port Triggering entry.
When you want to add or modify a Port Triggering, you can click the Add New button or Modify button, and then you will go to the next page. This page is used for adding or modifying a Port Triggering (shown in Figure
Figure
¾Common Applications - Some popular applications already listed in the
To add a new rule, enter the following data on the Port Triggering screen.
1.Click the Add New.. button.
2.Enter a port number used by the application to send an outgoing request.
3.Select the protocol used for Trigger Port from the
4.Enter the range of port numbers used by the remote system when it responds to the PC's request.
5.Select the protocol used for Incoming Ports range from the
6.Select the Enabled in the Status
7.Click the Save button to save the new rule.
There are many popular applications in the Common Application list. You can select it, the application will be filled in the Trigger Port, incoming Ports Range boxes. Then select the Enable in the
26