Figure 12-26 PPPoE Circuit-ID Config
The following entries are displayed on this screen:
Global Config
PPPoE Circuit-ID
Insertion:
Enable/Disable the PPPoE Circuit-ID Insertion function globally.
Port Config
Port Select: Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select: Select the desired port for configuration. It is multi-optional.
Port: Displays the port number.
Port State: Enable/Disable the PPPoE Circuit-ID Insertion feature for the
port.
Circuit-ID Type: Specify the Circuit-ID type for the port:
IP: The IP address of the switch will be used to encode the
Circuit-ID option. This is the default value.
MAC: The MAC address of the switch will be used to encode
the Circuit-ID option.
UDF: The user specified string with the maximum length of
32 characters will be used to encode the Circuit-ID option.
UDF Value: If the UDF is selected, specify a string with the maximum length
of 32 characters to encode the Circuit-id option.
Return to CONTENTS
219