TL-WPA281/TL-WPA271 Wireless N Powerline Extender
27
is page and to show the current
If the numbers of connected wireless stations go beyond one page, click the Next button to go to the
hown in Figure 3-10): Network Settings,
Station Settings and QoS Setting. Click any of them, and you will be able to configure the
ction. The detailed explanations for each submenu are provided below.
You cannot change any of the values on this page. To update th
connected wireless stations, click the Refresh button.
next page and click the Previous button to return to the previous page.
) Note: This page will be refreshed automatically every 5 seconds.
3.6 Powerline
There are three submenus under the Powerline menu (s
corresponding fun
Figure 3-20 Wireless menu
3.6.1 Network Settings
Selecting Powerline > Network Settin the network name of the Powerline
Extender or all the stations in current network on this page.
gs, and you can configure
Figure 3-21 Network Settings
¾ MAC Address - The physical address of the Powerline Extender, as seen from the powerline. The
value can not be changed.
¾ Device Password - The passwo The value can not be changed.
e correct passwords in current network,
Note:
rd of the Powerline Extender.
¾ Network Name - Enter the network name (factory default - HomePlugAV).
Click the Default button to enter the default network name.
Click the Set Local button to set the Powerline Extender.
Click the Set All button to set all stations which entered th
including the Powerline Extender.
)If you set all stations network name, the remote ones which power off or entered the wrong password
will not take effect.